(diode driver + Q-switch driver + DC power supply of marking head)
In a diode
pumped Nd:YAG laser marker, a diode driver, a Q-switch driver and a DC
power supply are needed. They are individual with large size and then
the size of the laser marker is also large. It is not convenient to move
the laser marker due to large size. We have developed a 3 in 1 laser
power supply and the above power supplies are integrated into one unit
with compact size.
Features:
-
Compact
in size and light in weight.
-
Modular
design for convenient maintenance.
-
Excellent performance.
-
Portable for easy moving.
Diode driver |
Output current |
0-30A adjustable |
Output voltage |
Max. 24V automatically adjustable |
Ripple |
<80mV |
Alarm and protection |
Over load, over temperature, over current and no load |
External current adjusting |
0
-10V corresponding 0 max. current
|
Q-switch driver |
Output RF power |
50W |
RF
frequency |
27.125MHz |
Modulation frequency |
0.45-50KHz adjustable |
First pulse suppression |
50us-5ms adjustable |
Modulation input |
TTL
level |
Load impedance |
50Ω |
VSWR |
≤1.2 |
Alarm and protection |
Over load, over temperature, over current and no load |
Power supply for marking head |
Output |
±25V/150W (or others up request) |
Environment |
Electric input |
220VAC/8A, 50Hz |
Storage temperature |
-20șC - +85șC |
Operation temperature |
+10șC - +55șC |
If 3 in 1
laser power is used in a laser marker, the marker will be simple and it
consists a laser head with a marking head and a power supply as shown as
follows. The marker will be portable.
New Product:
Diode Pumped
Lasers (532nm)
More News |