Diode
end-pumped lasers adopt full sealed-off design with small volume and low
power consumption as well as fiber-coupled pumping, which is easily for
the integration of system and equipment. The modularized design provides
the convenience for changing by customers. The laser beam is TEMoo with
high beam quality, high peak power and short pulse width. Excellent
resonator design can keep average laser power and pulsed peak power
stable & constant. This laser can meet the requirements of most
industrial precision processing. What's more, it's
absolute air cooling, the micro-optics design of key pumping source is
the most advanced all over the world.
Features
l
Diode pumped air cooling technology - low power
consumption
l
Unique split type design
l
Good beam quality.
It is
TEM00 with M²≤1.2. It can be used to mark fine lines,
suitable for high precision marking applications.
l
Fiber coupled diode pumping with high pumping efficiency
& long lifetime(>20,000 hrs).
l
The laser
is sealed and it is anti-dusty.
l
High performance price ratio.
Applications
End-pumped diode laser is suitable for marking on various
materials, such as nylon, ABS, PVC, PES, steel, titanium, copper,
plating materials, coating materials, sprayed materials, plastic,
rubber, epoxy resin etc.
Diode end-pumped
laser
has excellent applications in various fields, such as mobile phone,
jewellery, crafts, scribing, film engraving, laser marking
& engraving, resistance trimming, range finding, scientific research
etc.
Laser Beam Energy Distribution
The beam
energy distributions along X axis and Y axis are symmetric.
Specifications
Product model |
DPSS-532-5 |
Laser wavelength |
532nm |
Output average power |
0.83W@2kHz,
2.11W@5kHz,
3.8W@10kHz,
4.84W@20kHz |
Beam diameter |
0.8mm |
Beam divergence |
≤1mrad |
Pulse width |
6~30ns |
Pulse energy |
415uJ@2kHz,
422uJ@5kHz,
380uJ@10kHz,
242uJ@20kHz |
Peak power |
47kW@2kHz,
46kW@5kHz,
37.2kW@10kHz,
19.8kW@20kHz |
Beam mode |
TEM00 |
Beam quality M2 |
M2≤1.2 |
Pulse modulation |
1kHz~30kHz |
Power stability |
≤2% |
Pointing RMS |
≤10μrad |
Cooling |
Air |
Warm-up time |
3~5min |
Electrical input |
220VAC/50Hz |
Operation environment |
15oC - 30 oC (non dewing) |
Dimension
(L×W×H)
|
Power supply
415×425×127mm,
Laser head
270×130×109mm |
Weight |
Power supply
24kg, Laser head
7kg |
Sintec successfully participated at the Precision Engineering Industry Event
2011 Singapore Exhibition
More News |