Welcome to Sintec Optronics

        

         New Products  

          Passively Q-switched Laser Systems (DPSS) at 213nm, 266nm, 355nm, 532nm and 1064nm

 

SFQSS 213-Q4 Series Pulsed YAG Lasers

 

We provide passively Q-switched laser systems (DPSS) emitting at wavelengths of 213nm, 266nm, 355nm, 532nm, and 1064nm with excellent beam quality, which are widely used in various applications, such as biology, biomedicine, chemistry, and analytics.

 

Features:

         Pulsed ≤ 1.0ns

         Pulse energy >2.5uJ @ 200Hz

         Repetition rate up to 1kHz

         External and internal trigger mode

 

Specifications:

Model

SFQSS213-Q4

SFQSS213-Q4_1kHz

Wavelength

213 nm

Pulse energy

> 2.5 μJ @ 200 Hz

> 1.5 μJ @ 1 kHz

Peak power

> 2.5 kW @ 200 HZ

> 1.5 kW @ 1 kHz

Max pulse repetition rate

200 Hz

1 kHz

Pulse width (FWHM)

≤1.0 ns

Polarization ratio

> 100:1 vertical

Power stability

< 5 %

Laser classification

4 / IV

Spatial mode

TEM00

Beam divergence (full angle)

< 2.5 mrad

Beam diameter at output plane

400 200 μm

400 200 μm

Power consumption mean (max.)

15 W (40 W)

20 W (70 W)

Operating voltage (OEM)

12 V DC

Line voltage (with AC-DC adapter)

90 - 265 V AC (50 - 60 Hz)

Marking

CE

Communication interface

RS 232, USB

External Trigger (TTL, rising edge) 1Hz - max. repetition rate

Interface for TTL-control and power monitor

Warm-up time

< 5 min

Operating temperature

18 - 38 C

Dimensions laser head

209.25 x 54 x 50 mm

Dimensions controller STAND ALONE

174 x 115 x 64 mm

Dimensions controller OEM

174 x 130 x 35 mm

Options

Stand Alone System (incl. key-switch, heat-sink, manual shutter; CDRH compliant)

Manual shutter or Electrical Beam Blocker

 

 

SFQSS 213-50 Pulsed YAG Lasers

 

We provide passively Q-switched laser systems (DPSS) emitting at wavelengths of 213nm, 266nm, 355nm, 532nm, and 1064nm with excellent beam quality, which are widely used in various applications, such as biology, biomedicine, chemistry, and analytics.

 

Features:

         Single pulse

         Pulsed ≤ 1.3ns

         Repetition rate 1-60 Hz

         Pulse energy > 50uJ

 

Specifications:

Model

SFQSS213-50

Wavelength

213 nm

Spatial Mode

TEM00

M

< 1.5

Beam Divergence (full angle)

< 3.0 mrad

Beam Ellipticity

< 2:1

Beam Diameter

450 150 μm (at laser exit)

Peak Power

40 kW @ 1 - 60 Hz

Pulse Energy

> 50 μJ @ 1 - 60 Hz

Pulse Repetition Rate (with external trigger)

1 - 60 Hz

Pulse Width (FWHM)

< 1.3 ns

Polarization Ratio

> 100:1, horizontal

Long Term Pulse Energy Stability (6 hrs)

< 5 %

Pulse-To-Pulse Stability

< 2% rms (of pulse energy)

Laser Classification

4 / IV

Residual 266nm, 532nm, 1064nm Emission

< 0.7 μJ of output pulse energy

Optical Output

Free Beam

Electrical Power Consumption

< 90 W

Line Voltage

       90 - 265 V AC (50-60 Hz) or 24 V DC

Interface

RS 232, USB

Warm-up Time

< 10 min

Operating Temperature

18 - 38 C

Laser Head Size

273 x 65 x 55 mm (core dimensions)

Dimension laser head

328.5 x 89 x 55.1mm

Dimension OEM controller

166 x 129.8 x 105mm

Options

Manual Shutter or Electrical Beam Blocker,

External Telescope (e.g. M=5),

Stand alone system (CDRH compliant; incl. key switch, heat sink, manual beam shutter)

 

 

SFQSS 266-Q Series Pulsed YAG Lasers

 

We provide passively Q-switched laser systems (DPSS) emitting at wavelengths of 213nm, 266nm, 355nm, 532nm, and 1064nm with excellent beam quality, which are widely used in various applications, such as biology, biomedicine, chemistry, and analytics.

 

Features:

         Pulsed ≤ 1.0ns

         Pulse energy >1.5uJ @ 200Hz

         Repetition rate up to 5kHz

         External and internal trigger mode

         Free beam

 

Specifications:

Model

SFQSS266-Q1

SFQSS266-Q2

Wavelength

266 nm

Pulse energy

> 0.3 μJ @ 5 kHz

> 1.25 μJ @ 1 kHz

Peak power

> 0.3 kW @ 5 kHz

> 1.25 kW @ 1 kHz

Max pulse repetition rate

5 kHz

2.5 kHz

Pulse width (FWHM)

≤1.0 ns

Polarization ratio

> 100:1 vertical

Power stability

< 5

Laser classification

4 / IV

Spatial Mode

TEM00

Beam Divergence (full angle)

< 2.0 mrad

Beam Diameter at Output Plane

850 150 μm

850 150 μm

Power Consumption mean (max.)

15 W (40 W)

20 W (70 W)

Operating Voltage (OEM)

12 V DC

Line Voltage (with AC-DC adapter)

90 - 240 V AC (50 - 60 Hz)

Marking

CE

Communication interface

RS 232, USB

External Trigger (TTL, rising edge) 1Hz - max. repetition rate

Service interface for TTL-control and power monitor

Warm-up time

< 5 min

Operating Temperature

18 - 38 C

Options

Stand alone system (incl. key-switch, heat-sink and manual shutter; CDRH compliant),

Synchronization Signal Output (rise time < 2 ns),

Manual shutter or electrical beam blocker,

External telescope (e.g. M=3),

Manual or electrical driven wavelength switch 266 / 532nm,

Manual or electrical attenuator,

Upgrade to 8 mW

Dimensions Laser head

158.9 x 54 x 39 mm

Dimensions Controller STAND ALONE

134 x 115 x 64 mm

Dimensions Controller OEM

134 x 130 x 35 mm

 

 

SFQSS 266-Q4 Series Pulsed YAG Lasers

 

We provide passively Q-switched laser systems (DPSS) emitting at wavelengths of 213nm, 266nm, 355nm, 532nm, and 1064nm with excellent beam quality, which are widely used in various applications, such as biology, biomedicine, chemistry, and analytics.

 

Features:

         Pulsed ≤ 1.0ns

         Pulse energy >18uJ @ 200Hz

         Repetition rate up to 1kHz

         External and internal trigger mode

 

Specifications:

Model

SFQSS266-Q4

SFQSS266-Q4_1kHz

Wavelength

266 nm

Pulse energy

> 18 μJ @ 200 Hz

> 12 μJ @ 1 kHz

Peak power

> 18 kW @ 200 HZ

> 12 kW @ 1 kHz

Max pulse repetition rate

200 Hz

1 kHz

Pulse width (FWHM)

≤1.0 ns

Polarization ratio

> 100:1 vertical

Power stability

< 2% rms

Laser classification

4 / IV

Spatial Mode

TEM00

Beam Divergence (full angle)

< 1.5 mrad

Beam Diameter at Output Plane

1.0 0.4 mm

1.0 0.4 mm

Power Consumption mean (max.)

40 (70 W)

40 (70 W)

Operating Voltage (OEM)

12 V DC

Line Voltage (with AC-DC adapter)

90 - 265 V AC (50 - 60 Hz)

Marking

CE

Communication interface

RS 232, USB

External Trigger (TTL, rising edge) 1 Hz - max. repetition rate

Interface for TTL-control and power monitor

Warm-up time

< 5 min

Operating Temperature

18 - 38 C

Options

Stand Alone System (incl. key-switch, heat-sink, manual shutter; CDRH compliant),

Synchronization Signal Output (rise time < 2 ns),

Manual Shutter or Electrical Beam Blocker,

Manual or Electrical driven Wavelength Switch 266 / 532 nm,

External Telescope (e.g. M=5),

Manual or Electrical Attenuator

Dimensions Laser head

158.9 x 54 x 39 mm

Dimensions Controller STAND ALONE

174 x 115 x 64 mm

Dimensions Controller OEM

174 x 130 x 35 mm

 

 

 STFQSS 266-50 Pulsed YAG Lasers

 

We provide passively Q-switched laser systems (DPSS) emitting at wavelengths of 213nm, 266nm, 355nm, 532nm, and 1064nm with excellent beam quality, which are widely used in various applications, such as biology, biomedicine, chemistry, and analytics.

 

Features:

         Single pulse

         Pulsed 0.9-1.3ns

         Repetition rate 1-100Hz (optional up to 1kHz)

         Pulse energy >50uJ

 

Model

STFQSS266-50

Wavelength

266 nm

Spatial Mode

TEM00

M

< 1.5

Beam Divergence (full angle)

< 3.0 mrad

Beam Ellipticity

< 1.5:1

Waist Diameter

800200μm (located at about 110mm inside the laser head)

Beam Diameter

800 200 μm (at laser exit)

Peak Power

45 kW - 65 kW @ 1-100 Hz

Pulse Energy

> 50 μJ @ 1 - 100 Hz (> 15μJ @ 1kHz Option)

Pulse Repetition Rate (external trigger)

1 - 100 Hz

Pulse Width (FWHM)

0.9 - 1.3 ns

Polarization Ratio

> 100:1, vertical

Long Term Pulse Energy Stability (6 hrs)

< 2 %

Pulse-To-Pulse Stability

< 1% rms (of pulse energy)

Laser Classification

4 / IV

Residual 532nm Emission

< 0.5% of output pulse energy

Optical Output

Free Beam

Electrical Power Consumption

< 70 W

Line Voltage

       90 - 265 V AC (50-60 Hz) or 24 V DC

Interface

RS 232, USB

Warm-up Time

< 10 min

Operating Temperature

18 - 38 C

Laser Head Size

217 x 65 x 45 mm (core dimensions)

Dimension laser head

279 x 89 x 44.7mm

Dimension OEM controller

166 x 129.8 x 105mm

Options

Synchronization signal output (rise time < 2 ns);

Manual shutter or electrical beam blocker;

Manual or electrical driven wavelength switch 266/532nm;

Upgrade to 1 kHz repetition rate (parameters on request);

External telescope (e.g. M=5);

Manual or electrical attenuator;

Stand Alone System (incl. key-switch, heat-sink, manual shutter; CDRH compliant)

 

 

SFQSS 266-200 Pulsed YAG Lasers

 

We provide passively Q-switched laser systems (DPSS) emitting at wavelengths of 213nm, 266nm, 355nm, 532nm, and 1064nm with excellent beam quality, which are widely used in various applications, such as biology, biomedicine, chemistry, and analytics.

 

Features:

         Single pulse

         Pulsed <1.5ns

         Repetition rate 1-60Hz

         Pulse energy >200uJ

 

Model

SFQSS266-200

Wavelength

266 nm

Beam Divergence (full angle)

< 3.0 mrad

Beam Ellipticity

< 2:1

Waist Diameter

500150μm (located at about 110mm inside the laser head)

Beam Diameter

800 300 μm (at laser exit)

Peak Power

> 130 kW @ 20 Hz

Pulse Energy

> 200 μJ @ 20 Hz

Pulse Repetition Rate (external trigger)

1 - 60 Hz

Pulse Width (FWHM)

1.5 ns

Polarization Ratio

> 100:1, vertical

Long Term Pulse Energy Stability (6 hrs)

< 5 %

Laser Classification

4 / IV

Residual 532nm Emission

< 0.5% of output pulse energy

Optical Output

Free Beam

Electrical Power Consumption

< 90 W

Line Voltage

       90 - 265 V AC (50-60 Hz) or 24 V DC

Interface

RS 232, USB

Warm-up Time

< 10 min

Operating Temperature

18 - 35 C

Laser Head Size

217 x 65 x 45 mm (core dimensions)

Dimension laser head

279 x 89 x 44.7mm

Dimension OEM controller

166 x 129.8 x 105mm

Options

Synchronization signal output (rise time < 2 ns);

Manual shutter or electrical beam blocker;

Manual or electrical driven wavelength switch 266 / 532 nm;

External telescope (e.g. M=5);

Manual or electrical attenuator;

Stand Alone System (incl. key-switch, heat-sink, manual shutter; CDRH compliant)

 

 

SMOPA 266 Pulsed YAG Lasers

 

We provide passively Q-switched laser systems (DPSS) emitting at wavelengths of 213nm, 266nm, 355nm, 532nm, and 1064nm with excellent beam quality, which are widely used in various applications, such as biology, biomedicine, chemistry, and analytics.

 

Features:

         Very short pulses

         External triggering

         Single pulse operation

         Excellent beam quality

         High pulse-to-pulse stability

         Good output energy stability

 

Model

SMOPA266-50(Peak power)

SMOPA266-200mW (Average power)

Wavelength

266 nm

266 nm

Average power

-

> 200 mW @ 15 kHz

Peak Power

> 50 kW @ 1000 Hz

-

Pulse Energy

> 50 μJ @ 1000 Hz

> 15 μJ @ 15 kHz

Beam Divergence

< 2.0 mrad(full angle)

< 2.0 mrad(full angle)

Beam Ellipticity

< 2:1

< 2:1

Beam Diameter

1.0 0.3 mm (at laser exit)

1.0 0.3 mm (at laser exit)

Spatial Mode

TEM00

TEM00

Pulse Repetition Rate

1 - 1000 Hz(with external trigger)

1 Hz - 20 kHz(with external trigger)

Pulse Width (FWHM)

1.0 ns

1.0 ns

Polarization Ratio

> 100:1, vertical

> 100:1, vertical

Pulse Energy Stability

< 3 % (over 8 hrs)

< 3 % @ 15kHz (over 8 hrs)

Pulse-to-Pulse Energy Stability (over 60 sec)

< 3 % (<1% rms)

< 8 % (<2.5% rms)

Laser Classification

4 / IV

4 / IV

Optical Output

Free Beam

Free Beam

Power Consumption

< 150 W

< 250 W

Line Voltage

90 - 265 V AC (50-60 Hz)

90 - 265 V AC (50-60 Hz)

Interface

USB, SMB connector for 24 V DC output,

BNC connector for external triggering (TTL)

Warm-up Time

< 10 min

< 10 min

Operating Temp

18 - 38 C

18 - 38 C

Laser Head Size

61 x 120 x 314 mm (H x W x L)

61 x 120 x 314 mm (H x W x L)

Stand-Alone Unit Size

184 x 343 x 375 mm (H x W x L)

184 x 343 x 375 mm (H x W x L)

Options

Multimode fiber coupling;

Synchronization signal output (rise time < 2 ns);

Electrical or manual wavelength switch (266nm 532nm) or electrical beam blocker;

External telescope (beam expander)

External telescope (beam expander);

Manual attenuator;

Synchronization signal output (rise time < 2 ns);

Electrical or manual wavelength switch (266nm 532nm) or electrical beam blocker

 

 

SFTSS 355-Q Series Pulsed YAG Lasers

 

We provide passively Q-switched laser systems (DPSS) emitting at wavelengths of 213nm, 266nm, 355nm, 532nm, and 1064nm with excellent beam quality, which are widely used in various applications, such as biology, biomedicine, chemistry, and analytics.

.

 

Features:

         Pulsed ≤ 1.1ns

         Pulse energy >25uJ

         Repetition rate up to 20kHz

         External and internal trigger mode

         Free beam or fiber coupling

 

 

Model

SFTSS355-Q1

SFTSS355-Q2

SFTSS355-Q3

Wavelength

355 nm

Pulse energy

> 0.3 μJ @ 15 kHz

> 3 μJ @ 10 kHz

> 15 μJ @ 1 kHz

Peak power

> 0.25 kW @ 15 kHz

> 2.5 kW @ 10 kHz

> 13 kW @ 1 kHz

Max pulse repetition rate

20 kHz

10 kHz

2.5 kHz

Pulse width (FWHM)

≤1.1 ns

Polarization ratio

> 100:1 vertical

Power stability

< 5 %

< 3 %

< 3 %

Laser classification

3B / IIIb

Spatial Mode

TEM00

Beam Divergence (full angle)

< 3 mrad

< 3.5 mrad

< 4 mrad

Beam Diameter at Output Plane

190 50 μm

200 50 μm

200 50 μm

Power Consumption mean (max.)

15 W (40 W)

17 W (40 W)

20 W (70 W)

Operating Voltage (OEM)

12 V DC

Line voltage (AC-DC adapter)

90 - 240 V AC (50 - 60 Hz)

Marking

CE

Communication interface

RS 232, USB,

External Trigger (TTL, rising edge) 1 Hz - max. repetition rate,

Interface for TTL-control and power monitor

Warm-up time

< 5 min

Operating Temperature

18 - 38 C

Options

Stand Alone System (incl. key-switch, heat-sink, manual shutter; CDRH compliant),

Synchronization Signal Output (rise time < 2 ns),

Manual Shutter or Electrical Beam Blocker,

Manual or Electrical driven Wavelength Switch 266 / 532 nm,

External Telescope (e.g. M=5),

Manual or Electrical Attenuator

Dimensions Laser head

158.9 x 54 x 39 mm

Dimensions Controller STAND ALONE

Q1,Q2: 134 x 115 x 64 mm; Q3: 174 x 115 x 64 mm

Dimensions Controller OEM

Q1, Q2: 134 x 130 x 35 mm; Q3: 174 x 130 x 35 mm

 

:

 SFTSS 355-Q4 Series Pulsed YAG Lasers

 

We provide passively Q-switched laser systems (DPSS) emitting at wavelengths of 213nm, 266nm, 355nm, 532nm, and 1064nm with excellent beam quality, which are widely used in various applications, such as biology, biomedicine, chemistry, and analytics.

 

Features:

         Pulsed ≤ 1.4ns

         Pulse energy >60uJ @ 200Hz

         Repetition rate up to 1kHz

         External and internal trigger mode

         Free beam or Fiber coupling

 

Specifications:

Model

SFTSS355-Q4

SFTSS355-Q4_1kHz

Wavelength

355 nm

Pulse energy

> 60 μJ @ 200 Hz

> 42 μJ @ 1 kHz

Peak power

> 42 kW @ 200 HZ

> 30 kW @ 1 kHz

Max pulse repetition rate

200 Hz

1 kHz

Pulse width (FWHM)

≤1.4 ns

Polarization ratio

> 100:1 vertical

Power stability

< 2% rms

Laser classification

3B / IIIb

Spatial Mode

TEM00

Beam divergence (full angle)

< 4 mrad

Beam diameter at output plane

300 80 μm

300 80 μm

Power consumption mean (max.)

40 (70 W)

40 (70 W)

Operating voltage (OEM)

12 V DC

Line voltage (with AC-DC adapter)

90 - 265 V AC (50 - 60 Hz)

Marking

CE

Communication interface

RS 232, USB

External Trigger (TTL, rising edge) 1 Hz - max. repetition rate

Interface for TTL-control and power monitor

Warm-up time

< 5 min

Operating temperature

18 - 38 C

Options

Stand Alone System (incl. key-switch, heat-sink, manual shutter; CDRH compliant),

Synchronization Signal Output (rise time < 2 ns),

Fiber Coupling for fiber with core diameter > 100 μm,

Manual Shutter or Electrical Beam Blocker,

Manual or Electrical driven Wavelength Switch 266 / 532 nm,

External Telescope (e.g. M=5),

Manual or Electrical Attenuator

Dimensions laser head

158.9 x 54 x 39 mm

Dimensions controller STAND ALONE

174 x 115 x 64 mm

Dimensions controller OEM

174 x 130 x 35 mm

 

 

SFTSS 355-50 Pulsed YAG Lasers

 

We provide passively Q-switched laser systems (DPSS) emitting at wavelengths of 213nm, 266nm, 355nm, 532nm, and 1064nm with excellent beam quality, which are widely used in various applications, such as biology, biomedicine, chemistry, and analytics.

 

Features:

         Single pulse

         Pulsed 0.9-1.3ns

         Repetition rate 1-100Hz (optional up to 1kHz)

         Pulse energy >70uJ

 

Model

SFTSS355-50

Wavelength

355 nm

Spatial Mode

TEM00

M

< 1.5

Beam Divergence (full angle)

< 3.5 mrad

Beam Ellipticity

< 2:1

Waist Diameter

28080μm (located at about 110mm inside the laser head)

Beam Diameter

450 150 μm (at laser exit)

Peak Power

50 kW - 80 kW @ 1 - 100 Hz

Pulse Energy

> 70 μJ @ 1 - 100 Hz (> 25μJ @ 1kHz option)

Pulse Repetition Rate (external trigger)

1 - 100 Hz

Pulse Width (FWHM)

0.9 - 1.3 ns

Polarization Ratio

> 100:1, vertical

Long Term Pulse Energy Stability (6 hrs)

< 2 %

Pulse-To-Pulse Stability

< 1% rms (of pulse energy)

Laser Classification

3B / IIIb

Residual 532nm Emission

< 0.2% of output pulse energy

Optical Output

Free Beam

Electrical Power Consumption

< 70 W

Line Voltage

       90 - 265 V AC (50-60 Hz) or 24 V DC

Interface

RS 232, USB

Warm-up Time

< 15 min

Operating Temperature

18 - 38 C

Laser Head Size

217 x 65 x 45 mm (core dimensions)

Dimension Laser Head

279 x 89 x 44.7mm

Dimension OEM Controller

166 x 129.8 x 105mm

Options

SMA-connector for fibers with core diameter ≥ 70 μm;

Synchronization signal output (rise time < 2 ns);

Manual shutter or electrical beam blocker;

Manual or electrical driven wavelength switch 355 / 532 nm;

Upgrade to 1 kHz repetition rate (parameters on request);

External telescope (e.g. M=5);

Manual or electrical attenuator;

Stand Alone System (incl. key-switch, heat-sink, manual shutter; CDRH compliant)

 


SFTSS 355-300 Pulsed YAG Lasers

 

We provide passively Q-switched laser systems (DPSS) emitting at wavelengths of 213nm, 266nm, 355nm, 532nm, and 1064nm with excellent beam quality, which are widely used in various applications, such as biology, biomedicine, chemistry, and analytics.

 

Features:

         Single pulse

         Pulsed <1.7ns

         Repetition rate 1-80Hz

         Pulse energy >300uJ

 

Model

SFTSS355-300

Wavelength

355 nm

Beam Divergence (full angle)

< 2.5 mrad

Beam Ellipticity

< 2:1

Waist Diameter

500150μm (located at about 110mm inside the laser head)

Beam Diameter

800 300 μm (at laser exit)

Peak Power

> 180 kW @ 20 Hz

Pulse Energy

> 300 μJ @ 20 Hz

Pulse Repetition Rate (external trigger)

1 - 80 Hz

Pulse Width (FWHM)

1.7 ns

Polarization Ratio

> 100:1, vertical

Long Term Pulse Energy Stability (6 hrs)

< 2 %

Laser Classification

3B / IIIb

Residual 532nm Emission

< 0.5% of output pulse energy

Optical Output

Free Beam

Electrical Power Consumption

< 150 W

Line Voltage

       90 - 265 V AC (50-60 Hz) or 24 V DC

Interface

RS 232, USB

Warm-up Time

< 10 min

Operating Temperature

18 - 38 C

Laser Head Size

217 x 65 x 45 mm (core dimensions)

Dimension laser head

279 x 89 x 44.7mm

Dimension OEM controller

166 x 129.8 x 105mm

Options

SMA-connector for fibers with core diameter ≥ 400 μm;

Synchronization signal output (rise time < 2 ns);

Manual shutter or electrical beam blocker;

Manual or electrical driven wavelength switch 355 / 532 nm;

External telescope (e.g. M=5);

Manual or electrical attenuator;

Heat sink with fan(recommended for repetition rates>50 Hz)

Stand Alone System (incl. key-switch, heat-sink, manual shutter; CDRH compliant)

 


SMOPA 355 Pulsed YAG Lasers

 

We provide passively Q-switched laser systems (DPSS) emitting at wavelengths of 213nm, 266nm, 355nm, 532nm, and 1064nm with excellent beam quality, which are widely used in various applications, such as biology, biomedicine, chemistry, and analytics.

 

Features:

         Very short pulses

         External triggering

         Single pulse operation

         Excellent beam quality

         High pulse-to-pulse stability

         Good output energy stability

 

Model

SMOPA355-200(Peak power)

SMOPA355-500mW (Average power)

Wavelength

355 nm

355 nm

Average power

-

> 500 mW @ 15 kHz

Peak Power

> 180 kW @ 1000 Hz

-

Pulse Energy

> 200 μJ @ 1000 Hz

> 35 μJ @ 15 kHz

Beam Divergence

< 3.0 mrad(full angle)

< 3.0 mrad(full angle)

Beam Ellipticity

< 1.5:1

< 2:1

Beam Diameter

0.7 0.3 mm (at laser exit)

0.7 0.3 mm (at laser exit)

Spatial Mode

TEM00

TEM00

Pulse Repetition Rate

1 - 1000 Hz(with external trigger)

1 Hz - 20 kHz(with external trigger)

Pulse Width (FWHM)

1.1 ns

1.1 ns

Polarization Ratio

> 100:1, vertical

> 100:1, vertical

Pulse Energy Stability

< 3 % (over 8 hrs)

< 3 % @ 15kHz (over 8 hrs)

Pulse-to-Pulse Energy Stability (over 60 sec)

< 3 % (<1% rms)

< 8 % (<2.5% rms) @ 15kHz

Laser Classification

4 / IV

4 / IV

Optical Output

Free Beam

Free Beam

Power Consumption

< 200 W

< 250 W

Line Voltage

90 - 265 V AC (50-60 Hz)

90 - 265 V AC (50-60 Hz)

Interface

USB, SMB connector for 24 V DC output,

BNC connector for external triggering (TTL)

Warm-up Time

< 10 min

< 10 min

Operating Temp

18 - 38 C

18 - 38 C

Laser Head Size

61 x 120 x 314 mm (H x W x L)

61 x 120 x 314 mm (H x W x L)

Stand-Alone Unit Size

184 x 343 x 375 mm (H x W x L)

184 x 343 x 375 mm (H x W x L)

Options

Multimode fiber coupling;

Synchronization signal output (rise time < 1.5 ns);

Electrical or manual wavelength switch (355nm 532nm) or electrical beam blocker;

External telescope (beam expander) / Electrical or manual attenuator

Multimode fiber coupling;

Synchronization signal output (rise time < 2 ns);

Electrical or manual wavelength switch (355nm 532nm) or electrical beam blocker;

External telescope (beam expander) / Electrical or manual attenuator

 

 

SFDSS 532-Q Series Pulsed YAG Lasers

 

We provide passively Q-switched laser systems (DPSS) emitting at wavelengths of 213nm, 266nm, 355nm, 532nm, and 1064nm with excellent beam quality, which are widely used in various applications, such as biology, biomedicine, chemistry, and analytics.

.

Features:

         Pulsed ≤ 1.3ns

         Pulse energy >25uJ

         Repetition rate up to 20kHz

         External and internal trigger mode

         Free beam or fiber coupling

 

Specifications:

Model

SFDSS532-Q1

SFDSS532-Q2

SFDSS532-Q3

Wavelength

532 nm

Pulse energy

> 2 μJ @ 15 kHz

> 6 μJ @ 10 kHz

> 20 μJ @ 1 kHz

Peak power

> 1.5 kW @ 15 kHz

> 4.5 kW @ 10 kHz

> 15 kW @ 1 kHz

Max pulse repetition rate

20 kHz

10 kHz

2.5 kHz

Pulse width (FWHM)

≤ 1.3 ns

Polarization ratio

> 100:1 vertical

Power stability

< 5 %

< 3 %

< 3 %

Laser classification

3B / IIIb

Spatial mode

TEM00

Beam divergence (full angle)

< 3.5 mrad

< 3.5 mrad

< 3.5 mrad

Beam diameter at output plane

250 50 μm

260 50 μm

300 80 μm

Power consumption mean (max.)

15 W (40 W)

17 W (40 W)

20 W (70 W)

Operating voltage (OEM)

12 V DC

Line voltage (AC-DC adapter)

90 - 240 V AC (50 - 60 Hz)

Marking

CE

Communication interface

RS 232, USB,

External Trigger (TTL, rising edge) 1 Hz - max. repetition rate,

Interface for TTL-control and power monitor

Warm-up time

< 5 min

Operating temperature

18 - 38 C

Options

Stand alone system (incl. key-switch, heat-sink, manual shutter; CDRH compliant),

Synchronization Signal Output (rise time < 2 ns),

Fiber Coupling for fiber with core diameter > 70 μm,

Manual shutter or electrical beam blocker,

External telescope (e.g. M=4),

Manual or electrical attenuator,

Manual or electrical driven wavelength switch 532 nm / 1064 nm

Dimensions laser head

158.9 x 54 x 39 mm

Dimensions controller STAND ALONE

Q1,Q2: 134 x 115 x 64 mm; Q3: 174 x 115 x 64 mm

Dimensions controller OEM

Q1, Q2: 134 x 130 x 35 mm; Q3: 174 x 130 x 35 mm

 

 
 

SFDSS 532-Q4 Series Pulsed YAG Lasers

 

We provide passively Q-switched laser systems (DPSS) emitting at wavelengths of 213nm, 266nm, 355nm, 532nm, and 1064nm with excellent beam quality, which are widely used in various applications, such as biology, biomedicine, chemistry, and analytics.

 

Features:

         Pulsed ≤ 1.4ns

         Pulse energy >60uJ @ 200Hz

         Repetition rate up to 1kHz

         External and internal trigger mode

         Free beam or Fiber coupling

 

Model

SFDSS532-Q4

SFDSS532-Q4_1kHz

Wavelength

532 nm

Pulse energy

> 60 μJ @ 200 Hz

> 42 μJ @ 1 kHz

Peak power

> 42 kW @ 200 HZ

> 30 kW @ 1 kHz

Max pulse repetition rate

200 Hz

1 kHz

Pulse width (FWHM)

≤1.4 ns

Polarization ratio

> 100:1 vertical

Power stability

< 2% rms

Laser classification

3B / IIIb

Spatial Mode

TEM00

Beam divergence (full angle)

< 4 mrad

< 4.5 mrad

Beam diameter at output plane

400 100 μm

400 100 μm

Power consumption mean (max.)

40 (70 W)

40 (70 W)

Operating voltage (OEM)

12 V DC

Line voltage (with AC-DC adapter)

90 - 265 V AC (50 - 60 Hz)

Marking

CE

Communication interface

RS 232, USB

External Trigger (TTL, rising edge) 1 Hz - max. repetition rate

Interface for TTL-control and power monitor

Warm-up time

< 5 min

Operating temperature

18 - 38 C

Options

Stand alone system (incl. key-switch, heat-sink, manual shutter; CDRH compliant),

Synchronization Signal Output (rise time < 2 ns),

Fiber Coupling for fiber with core diameter > 100 μm,

Manual Shutter or Electrical Beam Blocker,

Manual or Electrical Wavelength Switch 532 nm / 1064 nm,

External Telescope (e.g. M=5),

Manual or Electrical Attenuator

Dimensions laser head

158.9 x 54 x 39 mm

Dimensions controller STAND ALONE

174 x 115 x 64 mm

Dimensions controller OEM

174 x 130 x 35 mm

 

 

 

SFDSS 532-150 Pulsed YAG Lasers

 

We provide passively Q-switched laser systems (DPSS) emitting at wavelengths of 213nm, 266nm, 355nm, 532nm, and 1064nm with excellent beam quality, which are widely used in various applications, such as biology, biomedicine, chemistry, and analytics.

 

Features:

         Single pulse

         Pulsed 1.1-1.5ns

         Repetition rate 1-100Hz (optional up to 1kHz)

         Pulse energy >150uJ

 

Model

STFDSS532-150

Wavelength

532 nm

Spatial Mode

TEM00

M

< 1.5

Beam Divergence (full angle)

< 5.5 mrad

Beam Ellipticity

< 2:1

Waist Diameter

28080μm (located at about 110mm inside the laser head)

Beam Diameter

500 150 μm (at laser exit)

Peak Power

100 kW - 140 kW @ 1 - 100 Hz

Pulse Energy

> 150 μJ @ 1 - 100 Hz (> 50μJ @ 1kHz option)

Pulse Repetition Rate (external trigger)

1 - 100 Hz

Pulse Width (FWHM)

1.1-1.5ns

Polarization Ratio

> 100:1, vertical

Long Term Pulse Energy Stability (6 hrs)

< 2 %

Pulse-To-Pulse Stability

< 1% rms (of pulse energy)

Laser Classification

3B / IIIb

Optical Output

Free Beam

Electrical Power Consumption

< 70 W

Line Voltage

       90 - 265 V AC (50-60 Hz) or 24 V DC

Interface

RS 232, USB

Warm-up Time

< 10 min

Operating Temperature

18 - 38 C

Laser Head Size

217 x 65 x 45 mm (core dimensions)

Dimension Laser Head

279 x 89 x 44.7mm

Dimension OEM Controller

166 x 129.8 x 105mm

Options

Fiber coupling for fibers with core diameter ≥100μm;

Synchronization signal output (rise time < 2 ns);

Manual shutter or electrical beam blocker;

Manual or electrical driven wavelength switch 532/1064 nm;

Upgrade to 1 kHz repetition rate (parameters on request);

External telescope (e.g. M=5);

Manual or electrical attenuator;

Stand Alone System (incl. key-switch, heat-sink, manual shutter; CDRH compliant)

 

 

SFDSS 532-150 Pulsed YAG Lasers

 

We provide passively Q-switched laser systems (DPSS) emitting at wavelengths of 213nm, 266nm, 355nm, 532nm, and 1064nm with excellent beam quality, which are widely used in various applications, such as biology, biomedicine, chemistry, and analytics.

 

Features:

         Single pulse

         Pulsed <1.8ns

         Repetition rate 1-80Hz

         Pulse energy >1000uJ

 

Model

STFDSS532-1000

Wavelength

532 nm

Spatial Mode

TEM00

Beam Divergence (full angle)

< 6.5 mrad

Beam Ellipticity

< 2:1

Waist Diameter

500150μm (located at about 110mm inside the laser head)

Beam Diameter

1.0 0.3 mm (at laser exit)

Peak Power

> 500 kW @ 20 Hz

Pulse Energy

> 1000 μJ @ 20 Hz

Pulse Repetition Rate (external trigger)

1 - 80 Hz

Pulse Width (FWHM)

<1.8ns

Polarization Ratio

> 100:1, vertical

Long Term Pulse Energy Stability (6 hrs)

< 8 %

Laser Classification

3B / IIIb

Optical Output

Free Beam

Electrical Power Consumption

< 150 W

Line Voltage

       90 - 265 V AC (50-60 Hz) or 24 V DC

Interface

RS 232 (USB on request)

Warm-up Time

< 10 min

Operating Temperature

20 - 40 C

Laser Head Size

217 x 65 x 45 mm (core dimensions)

Dimension laser head

337 x 102 x 88.7mm

Dimension controller

166 x 130 x 106mm

Options

SMA-connector for fibers with core diameter ≥ 400 μm;

Synchronization signal output (rise time < 2 ns);

Manual shutter or electrical beam blocker;

Manual or electrical driven wavelength switch 532/1064 nm;

External telescope (e.g. M=5);

Manual and electrical attenuator;

Stand alone system (CDRH compliant; incl. key switch, heat sink, manual beam shutter)

 

 

SMOPA 532 Pulsed YAG Lasers

 

We provide passively Q-switched laser systems (DPSS) emitting at wavelengths of 213nm, 266nm, 355nm, 532nm, and 1064nm with excellent beam quality, which are widely used in various applications, such as biology, biomedicine, chemistry, and analytics.

 

Features:

         Very short pulses

         External triggering

         Single pulse operation

         Excellent beam quality

         High pulse-to-pulse stability

         Good output energy stability

 

Model

STMOPA532-250(Peak power)

STMOPA532-700mW (Average power)

Wavelength

532 nm

532 nm

Average power

-

> 700 mW @ 15 kHz

Peak Power

> 200 kW @ 1000 Hz

-

Pulse Energy

> 250 μJ @ 1000 Hz

> 48 μJ @ 15 kHz

Beam Divergence

< 3.0 mrad(full angle)

< 3.0 mrad(full angle)

Beam Ellipticity

< 2:1

< 2:1

Beam Diameter

0.7 0.3 mm (at laser exit)

0.7 0.3 mm (at laser exit)

Spatial Mode

TEM00

TEM00

Pulse Repetition Rate

1 - 1000 Hz(with external trigger)

1 Hz - 20 kHz(with external trigger)

Pulse Width (FWHM)

1.2 ns

1.3 ns

Polarization Ratio

> 100:1, vertical

> 100:1, vertical

Pulse Energy Stability

< 3 % (over 8 hrs)

< 3 % @ 15kHz (over 8 hrs)

Pulse-to-Pulse Energy Stability (over 60 sec)

< 3 % (<1% rms)

< 8 % (<2.5% rms)

Laser Classification

3B / III

4 / IV

Optical Output

Free Beam

Free Beam

Power Consumption

< 150 W

< 250 W

Line Voltage

90 - 265 V AC (50-60 Hz)

90 - 265 V AC (50-60 Hz)

Interface

USB, SMB connector for 24 V DC output,

BNC connector for external triggering (TTL)

Warm-up Time

< 10 min

< 10 min

Operating Temp

18 - 38 C

18 - 38 C

Laser Head Size

61 x 120 x 314 mm (H x W x L)

61 x 120 x 314 mm (H x W x L)

Stand-Alone Unit Size

184 x 343 x 375 mm (H x W x L)

184 x 343 x 375 mm (H x W x L)

Options

Multimode fiber coupling;

Synchronization signal output (rise time < 2 ns);

Electrical or manual wavelength switch (532nm 1064nm) or electrical beam blocker;

External telescope (beam expander) / Electrical or manual attenuator

 

 

SDSS 1064-Q Series Pulsed YAG Lasers

 

We provide passively Q-switched laser systems (DPSS) emitting at wavelengths of 213nm, 266nm, 355nm, 532nm, and 1064nm with excellent beam quality, which are widely used in various applications, such as biology, biomedicine, chemistry, and analytics.

.

Features:

         Pulsed ≤ 1.5ns

         Pulse energy >70uJ

         Repetition rate up to 20kHz

         External and internal trigger mode

         Free beam or fiber coupling

 

Model

STDSS1064-Q1

STDSS1064-Q2

STDSS1064-Q3

Wavelength

1064 nm

Pulse energy

> 10 μJ @ 15 kHz

> 20 μJ @ 10 kHz

> 50 μJ @ 1 kHz

Peak power

> 6.5 kW @ 15 kHz

> 13 kW @ 10 kHz

> 31 kW @ 1 kHz

Max pulse repetition rate

20 kHz

10 kHz

2.5 kHz

Pulse width (FWHM)

≤ 1.5 ns

Polarization ratio

> 100:1 vertical

Power stability

< 5 %

< 3 %

< 3 %

Laser classification

3B / IIIb

Spatial Mode

TEM00

Beam divergence (full angle)

< 3.0 mrad

< 3.0 mrad

< 4.0 mrad

Beam diameter at output plane

600 100 μm

500 100 μm

600 100 μm

Power consumption mean (max.)

10 W (40 W)

13 W (40W)

15 W (70 W)

Operating voltage (OEM)

12 V DC

Line voltage (AC-DC adapter)

90 - 240 V AC (50 - 60 Hz)

Marking

CE

Communication interface

RS 232, USB,

External Trigger (TTL, rising edge) 1 Hz - max. repetition rate,

Interface for TTL-control and power monitor

Warm-up time

< 5 min

Operating temperature

18 - 38 C

Options

Stand alone system (incl. key-switch, heat-sink and manual shutter; CDRH compliant),

Synchronization Signal Output (rise time < 2 ns),

Fiber Coupling for fiber with core diameter > 70 μm,

Manual shutter or electrical beam blocker,

External telescope (e.g. M=4),

Manual or electrical attenuator

Dimensions Laser Head

87.3 x 35.4 x 33 mm

Dimensions Controller STAND ALONE

Q1,Q2: 134 x 115 x 64 mm; Q3: 174 x 115 x 64 mm

Dimensions Controller OEM

Q1, Q2: 134 x 130 x 35 mm; Q3: 174 x 130 x 35 mm

 

 

 SDSS 1064-Q4 Series Pulsed YAG Lasers

 

We provide passively Q-switched laser systems (DPSS) emitting at wavelengths of 213nm, 266nm, 355nm, 532nm, and 1064nm with excellent beam quality, which are widely used in various applications, such as biology, biomedicine, chemistry, and analytics.

 

Features:

         Pulsed ≤ 1.5ns

         Pulse energy >140uJ @ 200Hz

         Repetition rate up to 1kHz

         External and internal trigger mode

         Free beam or Fiber coupling

 

Model

SDSS1064-Q4

SDSS1064-Q4_1kHz

Wavelength

1064 nm

Pulse energy

> 140 μJ @ 200 Hz

>90 μJ @ 1 kHz

Peak power

> 90 kW @ 200 Hz

>60 kW @ 1 kHz

Max pulse repetition rate

200 Hz

1 kHz

Pulse width (FWHM)

≤1.5 ns

Polarization ratio

> 100:1 vertical

Power stability

< 2% rms

Laser classification

3B / IIIb

Spatial Mode

TEM00

Beam divergence (full angle)

< 4.0 mrad

< 4.0 mrad

Beam diameter at output plane

650 100 μm

650 100 μm

Power consumption mean (max.)

22 W (80 W)

22 W (80 W)

Operating voltage (OEM)

12 V DC

Line voltage (with AC-DC adapter)

90 - 265 V AC (50 - 60 Hz)

Marking

CE

Communication interface

RS 232, USB

External Trigger (TTL, rising edge) 1 Hz - max. repetition rate

Interface for TTL-control and power monitor

Warm-up time

< 5 min

Operating temperature

18 - 38 C

Options

Stand Alone System (incl. key-switch, heat-sink and manual shutter; CDRH compliant),

Synchronization Signal Output (rise time < 2 ns),

Fiber Coupling for fiber with core diameter > 70 μm,

Manual Shutter or Electrical Beam Blocker,

External Telescope (e.g. M=5),

Manual or Electrical Attenuator

Dimensions Laser head

87.3 x 35.4 x 33 mm

Dimensions Controller STAND ALONE

174 x 115 x 64 mm

Dimensions Controller OEM

174 x 130 x 35 mm

 

 

SDSS 1064-450 Pulsed YAG Lasers

 

We provide passively Q-switched laser systems (DPSS) emitting at wavelengths of 213nm, 266nm, 355nm, 532nm, and 1064nm with excellent beam quality, which are widely used in various applications, such as biology, biomedicine, chemistry, and analytics.

 

Features:

         Single pulse

         Pulsed 1.4-2ns

         Repetition rate 1-100Hz (optional up to 1kHz)

         Pulse energy >450uJ

 

Model

STDSS1064-450

Wavelength

1064 nm

Spatial Mode

TEM00

M

< 1.5

Beam Divergence (full angle)

< 6.5 mrad

Beam Ellipticity

< 2:1

Waist Diameter

380100 μm(located at about 110mm inside the laser head)

Beam Diameter

600 150 μm (at laser exit)

Peak Power

220 kW - 325 kW @ 1-100 Hz

Pulse Energy

>450 μJ @ 1 - 100 Hz (>150μJ @ 1kHz option)

Pulse Repetition Rate (external trigger)

1 - 100 Hz, (up to 1 kHz, on request)

Pulse Width (FWHM)

1.4 ns - 2 ns

Polarization Ratio

> 100:1, vertical

Long Term Pulse Energy Stability (6 hrs)

< 6 %

Pulse-To-Pulse Stability

< 1% rms (of pulse energy)

Laser Classification

3B / IIIb

Optical Output

Free Beam

Electrical Power Consumption

< 70 W

Line Voltage

       90 - 265 V AC (50-60 Hz) or 24 V DC

Interface

RS 232, USB

Warm-up Time

< 10 min

Operating Temperature

18 - 38 C

Laser Head Size

217 x 65 x 45 mm (core dimensions)

Dimension laser head

279 x 89 x 44.7mm

Dimension OEM controller

166 x 129.8 x 105mm

Options

Fiber coupling for fibers with core diameter ≥ 200 μm;

Synchronization signal output (rise time < 2 ns);

Manual shutter or electrical beam blocker;

Upgrade to 1 kHz repetition rate (parameters on request);

External telescope (e.g. M=5);

Manual or electrical attenuator;

Stand alone system (CDRH compliant; incl. key switch, heat sink, manual beam shutter)

 

 

 

SDSS 1064-3000 Pulsed YAG Lasers

 

We provide passively Q-switched laser systems (DPSS) emitting at wavelengths of 213nm, 266nm, 355nm, 532nm, and 1064nm with excellent beam quality, which are widely used in various applications, such as biology, biomedicine, chemistry, and analytics.

 

Features:

         Single pulse

         Pulsed <2.5ns

         Repetition rate 1-80Hz

         Pulse energy >2500uJ

 

Model

SFDSS1064-3000

Wavelength

1064 nm

Spatial Mode

TEM00

Beam Divergence (full angle)

< 9 mrad

Beam Ellipticity

< 2:1

Waist Diameter

600150μm (located at about 110mm inside the laser head)

Beam Diameter

1200 400 μm (at laser exit)

Peak Power

> 1250 kW @ 20 Hz

Pulse Energy

> 2500 μJ @ 20 Hz

Pulse Repetition Rate (external trigger)

1 - 80 Hz

Pulse Width (FWHM)

<2.5ns

Polarization Ratio

> 50:1, vertical

Long Term Pulse Energy Stability (6 hrs)

< 8 %

Laser Classification

3B / IIIb

Optical Output

Free Beam

Electrical Power Consumption

< 100 W (@230V AC)

Line Voltage

       90 - 265 V AC (50-60 Hz) or 24 V DC

Interface

RS 232 (USB on request)

Warm-up Time

< 10 min

Operating Temperature

28 - 35 C

Laser Head Size

217 x 65 x 45 mm (core dimensions)

Dimension laser head

337 x 102 x 88.7mm

Dimension controller

166 x 130 x 106mm

Options

SMA-connector for fibers with core diameter ≥ 600 μm;

Synchronization signal output (rise time < 2 ns);

Manual shutter or electrical beam blocker;

Manual or electrical attenuator;

Stand alone system (CDRH compliant; incl. key switch, heat sink, manual beam shutter)

 


 

SMOPA 1064 Pulsed YAG Lasers

 

We provide passively Q-switched laser systems (DPSS) emitting at wavelengths of 213nm, 266nm, 355nm, 532nm, and 1064nm with excellent beam quality, which are widely used in various applications, such as biology, biomedicine, chemistry, and analytics.

 

Features:

         Very short pulses

         External triggering

         Single pulse operation

         Excellent beam quality

         High pulse-to-pulse stability

         Good output energy stability

 

Model

SMOPA1064-650(Peak power)

SMOPA1064-2000mW(Average power)

Wavelength

1064 nm

1064 nm

Average power

-

> 2000 mW @ 15 kHz

Peak Power

> 450 kW @ 1000 Hz

-

Pulse Energy

> 650 μJ @ 1000 Hz

> 130 μJ @ 15 kHz

Beam Divergence

< 3.0 mrad(full angle)

< 5.0 mrad(full angle)

Beam Ellipticity

< 2:1

< 2:1

Beam Diameter

1.0 0.3 mm (at laser exit)

0.7 0.3 mm (at laser exit)

Spatial Mode

TEM00

TEM00

Pulse Repetition Rate

1 - 1000 Hz(with external trigger)

1 Hz - 20 kHz(with external trigger)

Pulse Width (FWHM)

1.4 ns

1.5 ns

Polarization Ratio

> 100:1, vertical

> 100:1, vertical

Pulse Energy Stability

< 3 % (over 8 hrs)

< 5 % @ 15kHz (over 8 hrs)

Pulse-to-Pulse Energy Stability (over 60 sec)

< 3 % (<1% rms)

< 8 % (<2.5% rms)

Laser Classification

4 / IV

4 / IV

Optical Output

Free Beam

Free Beam

Power Consumption

< 150 W

< 250 W

Line Voltage

90 - 265 V AC (50-60 Hz)

90 - 265 V AC (50-60 Hz)

Interface

USB, SMB connector for 24 V DC output,

BNC connector for external triggering (TTL)

Warm-up Time

< 10 min

< 10 min

Operating Temp

18 - 38 C

18 - 38 C

Laser Head Size

61 x 120 x 314 mm (H x W x L)

61 x 120 x 314 mm (H x W x L)

Stand-Alone Unit Size

184 x 343 x 375 mm (H x W x L)

184 x 343 x 375 mm (H x W x L)

Options

Multimode fiber coupling;

Synchronization signal output (rise time < 2 ns);

Electrical beam blocker;

External telescope (beam expander) / Electrical or manual attenuator

 

  Other DPSS Lasers    High Peak Power DPSS Lasers     High Repetition Rate DPSS Lasers

Sintec Optronics Pte Ltd

10 Bukit Batok Crescent #07-02 The Spire Singapore 658079

Tel: +65 63167112 Fax: +65 63167113  

E-mail: sales@sintec.sg sales@SintecOptronics.com

URL: http://www.sintec.sghttp://www.SintecOptronics.com

For more and updated information, please go to our New Websites.